Metal roofs. Built once. Done.
The only quad-certified roofing contractor based in Stanislaus and Merced counties — OC Platinum Preferred + GAF Master Elite + GAF Gold Elite certifications spanning shingle AND metal systems. Standing-seam, corrugated, R-panel, and stone-coated steel. 40–60 year paint warranties. Lifetime substrate. 41 years installing in Central Valley heat.
- 4.9 (60+ Google reviews)
- OC Platinum Preferred
When to call us for metal roofing.
Metal roofing makes sense when you want longest-possible service life (40-70 years), highest fire resistance (Class A rating), best wind resistance (rated for 110-140 mph winds), or maximum solar-ready compatibility. Metal is also the best choice for low-slope sections where traditional shingles aren't suitable, and for properties in fire-prone hill or wildland-urban interface zones.
Four metal profiles. One install standard.
Standing-Seam Snap-Lock
Premium architectural look. Concealed fasteners — no roof penetrations.
- Material:
- 24 / 26 ga galvalume or aluminum
- Fasteners:
- concealed clip (no roof penetrations)
- Warranty:
- 40–60 yr paint, lifetime substrate
- Best for:
- modern, ranch, premium residential
Standing-Seam Mech-Seamed
Commercial-grade mechanically-seamed. Highest wind / water performance.
- Material:
- 22 / 24 ga galvalume
- Seam:
- 180° double-lock mechanically seamed
- Warranty:
- 40–60 yr paint, lifetime substrate
- Best for:
- low-slope commercial, high-wind exposures
R-Panel or Corrugated
Exposed-fastener. Classic ag / industrial look. Best value per sqft.
- Material:
- 26 / 29 ga galvalume
- Fasteners:
- exposed neoprene-gasket screws
- Warranty:
- 25–40 yr paint, 20+ yr substrate
- Best for:
- barns, outbuildings, ranches, value projects
Stone-Coated Steel
Looks like shake / tile / shingle — performs like metal.
- Profile:
- shake, tile, or shingle aesthetic
- Weight:
- ~150 lbs / square (vs ~225 for asphalt)
- Warranty:
- 50-year transferable
- Best for:
- HOA-restricted neighborhoods, aesthetic priorities
Metal Roofing materials & systems we install.
We install standing-seam metal from PAC-CLAD, Englert, MBCI, and Drexel Metals, usually 24-gauge or 26-gauge steel with Kynar 500 PVDF coatings (resists fading and chalking for 30+ years). Aluminum standing-seam is available for coastal applications. Color options include traditional matte galvalume, classic colors (Burnished Slate, Slate Gray, Charcoal), and new (Metallic Silver, Copper Penny). All systems carry 35-50 year manufacturer warranties.
Five steps. Zero mystery.
Inspection
On-site diagnostic. Drone imagery, core samples where needed, photo log. Written report within 48 hours of site visit.
System recommendation
Right system for your home, drainage, and budget. Flat-rate written proposal with warranty tier options.
Scheduling
Job sequenced around your schedule. Material delivered the day work starts — no curb-clutter.
Installation
Manufacturer-certified crews. OSHA fall protection. Drug-free worksite. Daily walks with the homeowner.
Warranty registration
Manufacturer warranty registered in your name. Maintenance schedule documented. Single point of contact for any warranty event for the life of the system.
Metal roof inspections scheduled inside 5–10 business days. Most quotes go out within one business week of site visit.
Mario or a lead foreman walks every metal install personally before signoff. Family-owned since 1996.
What to expect — our metal roofing process.
Metal installs are usually more complex than asphalt due to specialized seaming techniques. Tear-off through final detail flashing on a 2,000-sq-ft home runs 3-5 days. We use high-temp synthetic underlayment beneath metal panels (rated for the higher heat that metal systems see). Snow guards are installed on north-facing slopes for foothill applications. Final inspection includes seam-tightness testing.
Flat-rate quotes. No mid-project surprises.
| System | Cost / sq ft installed | Typical 2,500 sq ft home | Paint warranty |
|---|---|---|---|
| Standing-Seam Snap-Lock | $12–$18 | $30K–$45K | 40–60 years |
| Standing-Seam Mech-Seamed | $14–$20 | $35K–$50K | 40–60 years |
| R-Panel or Corrugated | $7.50–$12 | $18K–$30K | 25–40 years |
| Stone-Coated Steel | $11–$17 | $27K–$42K | 50 years |
| Metal over existing shingle | $9–$14 | $22K–$35K | 40 years |
Metal installs require proper attic ventilation to prevent thermal expansion noise and moisture trapping. Underlayment grade matters more than shingle install — we use synthetic high-temp underlayment under all metal systems. Cool-roof colors (Energy Star rated) qualify for California Title 24 compliance and HVAC savings. Add ~$2/sqft if installing over existing shingle (requires furring strips for ventilation gap).
Metal Roofing cost in California.
Metal roofing runs $7.50–$20/sq-ft installed (higher than $6–$10/sq-ft for asphalt) — but the longer service life makes the long-term cost-per-year competitive or better. A 2,000-sq-ft home with standing-seam metal usually costs $24,000-$40,000 turnkey. Insurance premiums often drop 5–15% on metal-roof homes due to fire and wind resistance ratings.
Get your price range.
We call or text you back. No spam.
The questions homeowners actually ask.
Is metal really louder in rain?
On a properly installed standing-seam metal roof with attic insulation, no — most homeowners report it sounds about the same as asphalt shingle from inside the house. The exception is uninsulated outbuildings (barns, sheds) where metal is genuinely louder because there's nothing between the panel and the air space below. For residential applications with R-30+ attic insulation and underlayment, the noise difference is barely perceptible. Standing-seam is quieter than exposed-fastener due to the air gap created by the seam profile.
Will metal expand and contract in 100°F+ Central Valley summers?
Yes — metal expands ~1/8" per 10 ft of panel length per 100°F temperature swing. Standing-seam systems handle this with floating clips that let the panel move without loosening fasteners. Exposed-fastener systems (R-Panel, corrugated) handle expansion with neoprene-gasket screws and proper spacing. We install per manufacturer specs that anticipate Central Valley's 30°F–110°F annual swing. Improperly installed metal can ripple or pop fasteners — properly installed metal sits flat for 40+ years.
Standing-seam vs corrugated — what's the real difference?
Standing-seam ($12–$20/sqft installed): premium look, concealed fasteners (no roof penetrations), 40–60 year paint warranty, architectural grade. R-Panel/corrugated ($7–$11/sqft): classic exposed-fastener look, more visible screws (every 12–24"), 25–40 year paint warranty, ag/industrial grade. For most residential applications where look matters, standing-seam wins. For barns, outbuildings, and value-driven projects, corrugated is fine.
Does metal void or impact my homeowner's insurance?
Most California carriers neutral or favorable on metal roofs — many offer a fire-resistance discount (5–15%) for Class A metal systems. Cool-roof certified metal may qualify for additional energy efficiency credits. We provide a manufacturer compliance letter at close-out that you can give your insurance agent for rate review. Negative impact is rare; check with your specific carrier before install if the discount is important to your decision.
Can metal go over existing shingles or does it require tear-off?
Both are possible. Tear-off is the cleaner answer: full deck inspection, fresh underlayment, longer install life. Recover (metal-over-shingle): saves ~25% on initial cost but requires furring strips to create a ventilation gap (otherwise the trapped heat shortens the metal's life). We core-sample the existing roof first — if the underlying deck has any rot, tear-off is the only honest answer. About 60% of our metal projects are tear-off, 40% recover, depending on deck condition.
How long does metal actually last?
Standing-seam galvalume: 50–70 years documented. Stone-coated steel: 50+ years (50-year transferable warranty). R-Panel: 30–40 years before paint fades enough to warrant recoating (the substrate lasts longer than the finish). The substrate is essentially permanent — metal failures are almost always failures of the finish (fade, chalk) or fastener (uplift, leak), not the steel itself. Most metal roofs outlast the homes they're installed on.
What about ice / snow — do I need snow guards in the Central Valley?
Almost never across the Central Valley — snow events are rare and minor on the valley floor. Homes at higher elevation on the valley's eastern edge get enough snow events that we recommend snow guards on standing-seam metal to prevent sliding snow injuries or gutter damage. Costs ~$200–$500 added at install. We default to including them on any home above 1,500 ft elevation; below that, optional.
Why isn't CertainTeed listed as a metal certification on this page?
Because CertainTeed Select ShingleMaster is a SHINGLE-specific certification — it covers asphalt shingle products only. We hold the cert (which is why it appears on our shingle roofing pages), but it would be misleading to claim CertainTeed cert credentials for metal work. Our metal installs are covered under GAF Master Elite + GAF Gold Elite + Owens Corning Platinum Preferred — all of which legitimately credential us for metal systems.
Do metal roofs rust?
No — quality metal roofing uses coated steel or aluminum. Our systems are galvalume steel or aluminum with Kynar 500 PVDF finishes, and metal roof failures are almost always finish issues (fade, chalk) or fasteners, not the steel itself. Rust is not a concern when the roof is properly installed and maintained.
Are metal roofs good for solar panels?
Yes — metal offers maximum solar-ready compatibility. Standing-seam panels accept clamp-on solar mounts that attach to the seams instead of penetrating the roof surface. With a 40–70 year service life, metal makes a durable base for a solar array, and we can pair metal roofing with solar panel installation.
Why homeowners choose us for metal roofing.
Certifications — four manufacturer programs
Most local roofers can install the materials. Few can register the manufacturer warranties that protect those installations for 25-50 years. As an OC Platinum Preferred contractor (the top tier of the Owens Corning contractor network), we register Platinum Protection warranties (lifetime, non-prorated for the first 25 years) that cover both materials and workmanship. As a GAF Master Elite contractor (about 2% of roofers in North America, per GAF), we register Golden Pledge warranties that cover 50 years of materials plus 25 years of workmanship. None of these warranty tiers are available through uncertified contractors.
Audits keep the certifications honest
Each manufacturer maintains the certification only if our install quality and review scores stay above their thresholds. As a result, we can’t cut corners on material grade, install method, or finish quality — the manufacturers track every job we register. We hold OC Platinum Preferred and GAF Master Elite status — maintained continuously.
W-2 crews, factory-trained
The crew matters as much as the certifications. Our metal roofing crews are W-2 employees of Econo Roofing — not subcontractors — and each crew member completes annual factory training from GAF and Owens Corning. The difference between a 25-year roof and a 35-year roof comes down to install detail: proper underlayment lap, correct nail placement and depth, sealed flashing, adequate attic ventilation. Mario or a lead foreman personally reviews every project scope before work begins and walks the finished roof before the crew leaves.
Bonded, insured, family-owned since 1996
We stand by our work financially. We carry $1 million general liability insurance and full workers comp coverage, plus a $25,000 CSLB contractor bond. License #749551 — verifiable at CSLB.ca.gov. We’re Latino-owned, family-owned, and operated since 1996: same family, same standards, deep roots in the Central Valley. That permanence matters when you’re investing in 30-50 years of weatherproofing.
Flat-rate pricing, no surprises
Pricing is flat-rate. We quote the project, you approve the project, and that’s the price. No change orders mid-project unless you change the scope. No surprise charges. No upselling once the crew is on the roof. Free written estimates with no obligation. Call (209) 668-6222 to reach the same team that has been doing this work for 30+ years.
Bonded. Insured. Family-owned since 1996.
CSLB License
#749551
C-39 roofing classification. Verifiable at cslb.ca.gov.
General Liability
$1M / occurrence
Plus workers comp coverage. Certificate of insurance on request.
Contractor Bond
$25,000 CSLB
State-mandated. Verifiable at cslb.ca.gov.
BBB Rating
A+
BBB A+ rated · listed with the Better Business Bureau since 1999.
Safety
OSHA-compliant
Fall protection plans · drug-free worksite · background checks · daily safety briefings.
Founder
Mario Espindola
On every project scope before work begins; walks the finished roof before the crew leaves. 41 years on roofs.
Continuity
Family-owned since 1996
Same family, same standards across every job.
Warranty Backup
Single document
Manufacturer + workmanship warranty registered in your name at close-out.
Services that work with this one.
- Roof VentilationPairs with every roof — preserves manufacturer warranty.
- Residential RoofingFull residential roofing solutions.
- Commercial RoofingMetal systems for commercial buildings.
- Solar RoofingPair metal roofing with solar panels.
- Roof ReplacementUpgrade from shingles to metal.
Residential tight. Commercial wide.
- Residential 18 cities · 2 counties Stanislaus + Merced corridor. Crews live where they work.
- Commercial Stanislaus + Merced Big-ticket commercial work across the Central Valley.
Metal Roofing Service Areas
Econo Roofing offers metal roofing across the Central Valley, serving Stanislaus County and Merced County. CSLB #749551. Free estimate on every project.
Talk to Mario’s team in 30 seconds.
No pressure, no obligation. Free written estimate. Priority response for active leaks.
Or call (209) 668-6222 · License #749551 · OC Platinum Preferred
