Owens Corning, GAF, and CertainTeed are major U.S. asphalt shingle makers. Owens Corning’s latest annual report calls it the second-largest U.S. producer. All three offer tiered warranty programs. Your coverage depends on who installs the roof. The same shingle. The same day. The same roof. The terms can vary by a lot. Your contractor’s cert level picks the tier.
The hidden gap in standard warranties.
On paper, a manufacturer warranty plus a contractor workmanship warranty looks like full coverage. In real life, the standard set leaves a gap. That gap can cost you. A standard manufacturer warranty is voided by a bad install. Most roof failures trace back to install errors — the kind of damage a workmanship warranty (not the material warranty) is built to catch. That makes it the top risk on any reroof.
A standard workmanship warranty is also only as good as the contractor’s lifespan. If your installer shuts down in year 4 of a 5-year workmanship plan, the warranty dies too. Manufacturer-backed system warranties solve this. They cover both material defects and workmanship in one plan. The manufacturer stands behind the work, not the local installer. You only get them through elite contractors. That means Owens Corning Platinum Preferred, GAF Master Elite, and CertainTeed SELECT ShingleMaster.
Three types of roofing warranties.
Before comparing manufacturers, understand the three warranty types that apply to every roof replacement:
Covers defects in the roofing product itself: early granule loss, peeling layers, cracks, or failure to hold up as rated. The manufacturer issues it (Owens Corning, GAF, or CertainTeed). Length and terms vary by tier.
Covers install errors: bad flashing, wrong nail spots, weak seals at vents. The contractor issues this. At top tiers, the manufacturer also backs the work. Most roof failures in the first 10 years come from install — so this is your key warranty early on.
Each manufacturer’s top tier rolls material and workmanship into one full package. These are only sold through the manufacturer’s top contractors. They usually need a full roofing system, not just shingles.
Owens Corning warranty tiers.
Owens Corning ties its warranty program to contractor cert level. Three tiers are on offer:
Standard limited warranty.
Available through: Any contractor
Material coverage: Limited lifetime on shingles, prorated after year 10
Workmanship: None from manufacturer
Labor costs: Not covered
Transferable: Limited transferability
Preferred Protection warranty.
Available through: OC Preferred contractors
Material coverage: Limited lifetime, non-prorated for 50 years
Workmanship: 10 years manufacturer-backed
Labor costs: Covered for 10 years
Transferable: Yes, within coverage period
Platinum Protection warranty (50-year).
Available through: OC Platinum Preferred contractors only
Material coverage: Lifetime, non-prorated for 50 years
Workmanship: Lifetime, non-prorated for the first 25 years
Labor costs: Fully covered for qualifying claims
Transferable: Yes, full transferability
Econo Roofing is the only quad-certified roofing contractor based in Stanislaus and Merced counties. It holds Owens Corning’s top Platinum Preferred tier, the only way to get Platinum Protection coverage here.
GAF warranty tiers.
GAF offers four warranty levels. Each one needs a higher contractor cert:
Standard limited warranty.
Available through: Any contractor
Material coverage: Limited lifetime, prorated
Workmanship: None
Labor costs: Not covered
System Plus warranty.
Available through: GAF Certified contractors
Material coverage: Limited lifetime, non-prorated for 50 years
Workmanship: None (materials only)
Requirement: Must install 3+ qualifying GAF products
Labor costs: Not covered
Silver Pledge warranty.
Available through: GAF Certified Plus or Master Elite contractors
Material coverage: Limited lifetime, non-prorated for 50 years
Workmanship: 10 years manufacturer-backed
Requirement: Complete GAF roofing system
Labor costs: Covered for 10 years
Golden Pledge warranty.
Available through: GAF Master Elite contractors only
Material coverage: 50 years non-prorated
Workmanship: 25 years manufacturer-backed
Wind warranty: WindProven wind coverage available — no maximum wind speed limit when LayerLock shingles are installed with four qualifying GAF accessories (15-year term)
Labor costs: Fully covered
Transferable: Yes
Econo Roofing holds GAF Master Elite status. It is one of the most selective tiers in U.S. roofing. Want a deep dive? Read our GAF Golden Pledge vs. Silver Pledge comparison.
CertainTeed warranty tiers.
CertainTeed also ties coverage to contractor cert. There are four main tiers:
Standard limited warranty.
Available through: Any contractor
Material coverage: Limited lifetime, prorated
Workmanship: None from manufacturer
Labor costs: Not covered
SureStart warranty.
Available through: CertainTeed credentialed contractors
Material coverage: Non-prorated for first 10 years, then prorated
Workmanship: None from manufacturer
Labor costs: Covered for first 10 years only
4-Star SureStart PLUS warranty.
Available through: CertainTeed ShingleMaster contractors
Material coverage: 50-year full-value (non-prorated) coverage of materials, labor, tear-off and disposal on Lifetime shingles
Workmanship: None from manufacturer — manufacturer-backed workmanship coverage is exclusive to the 5-Star tier
Requirement: A complete CertainTeed Integrity Roof System installed by a credentialed contractor
Transferable: For 12 years
5-Star SureStart Plus warranty.
Available through: CertainTeed SELECT ShingleMaster contractors only
Material coverage: 50 years, fully non-prorated
Workmanship: 25 years manufacturer-backed
Requirement: 4+ qualifying CertainTeed Integrity Roof System products
Labor costs: Fully covered for 25 years
Transferable: Yes
Econo Roofing holds CertainTeed SELECT ShingleMaster status. That lets us register the 5-Star SureStart Plus warranty. See our certifications page for the records.
We'll walk you through the warranty tiers for each manufacturer and help you choose the best coverage for your home and budget. No obligation.
Get a Free EstimateHead-to-head warranty comparison chart.
This table compares the top warranty tiers from each manufacturer. These are the warranties available through Econo Roofing:
| Feature | OC Platinum Protection | GAF Golden Pledge | CT 5-Star SureStart Plus |
|---|---|---|---|
| Contractor required | Platinum Preferred | Master Elite | SELECT ShingleMaster |
| Material coverage | Lifetime (50 yr non-prorated) | 50 yr non-prorated | 50 yr non-prorated |
| Workmanship coverage | Lifetime (25 yr non-prorated) | 25 years | 25 years |
| Labor costs covered | Yes, full | Yes, full | Yes, for 25 years |
| Prorated after | 50 years | 50 years | 50 years |
| Wind coverage | Up to 130 mph (Duration Series with SureNail) | Up to 130 mph with special installation — or WindProven: no maximum wind speed with LayerLock shingles plus four qualifying accessories | Varies by product and installation method |
| Transferable | Yes | Yes | Yes |
| System requirement | Full OC Total Protection system | Complete GAF Lifetime system | 4+ CT Integrity Roof System products |
| Econo Roofing certified | Yes | Yes | Yes |
What voids a roofing warranty.
All three manufacturers share many of the same exclusions. Any of the items below can void a claim. The manufacturer or tier does not matter. For the full deep-dive, see the 7 mistakes that void a roof warranty:
Bad install. If the roof was not put on to the manufacturer's spec, the warranty is void. That covers wrong nail spacing, bad flashing, or the wrong starter strips. This is why your contractor's cert level matters.
Weak attic vents. Every major manufacturer has minimum vent rules to keep your warranty live. In Central Valley summers, attics often top 150°F. That makes this the #1 reason warranties get voided. Bad vents wear out shingles faster than the warranty was built for. Vent count is part of every re-roof estimate we write, in Turlock and across the county.
Unapproved repairs or roof holes. If a non-qualified party works on the roof after install, the warranty may be void in that spot. Think satellite dish crews, HVAC techs, or solar crews without roof creds. Your original roofer should do or supervise all roof holes.
Install over old layers. Top tiers from all three manufacturers need a full tear-off. Overlay installs (new shingles laid over old) usually limit you to the base warranty.
Non-approved parts. Using underlayment, ice and water shield, or starter strips from another brand can void the top warranty. All three manufacturers need their own branded parts for top tiers.
Skipped upkeep. Letting clear damage sit (cracked vent boots, loose flashing, debris in drains) and then filing a claim for inside damage is usually denied. Regular roof care guards both your roof and your warranty.
Why contractor certification matters.
One thing sets your warranty tier: your contractor’s cert level. A homeowner can’t buy a higher tier on their own. The contractor’s status is the gate.
Each manufacturer sets strict rules for their top cert:
Owens Corning Platinum Preferred needs steady training, tracked customer scores, full insurance, and a proven install record. Only top-tier OC Platinum Preferred contractors hold this cert.
GAF Master Elite needs a license, insurance, a proven name, and steady training. Only a small share of U.S. roofing contractors qualify.
CertainTeed SELECT ShingleMaster needs you to finish CertainTeed’s Master Shingle Applicator training, pass cred exams, and stay in good standing.
Econo Roofing holds all three top certs. That means OC Platinum Preferred, GAF Master Elite, and CertainTeed SELECT ShingleMaster. No other contractor based in Stanislaus or Merced County holds all three. So you can pick any major manufacturer and still get their best tier. That holds whether the job is in Modesto or out in the county.
Prorated vs. non-prorated. The real difference.
The big number on a shingle pack can mislead you. The real test is whether coverage is prorated or non-prorated:
After the first few years, the manufacturer pays less each year. A 30-year prorated plan that prorates at year 10 might cover 50% at year 15. By year 25 it covers just 10-15%. On paper, the warranty still lasts 30 years. But the cash value falls fast. That’s why non-prorated is worth the upgrade.
The manufacturer pays for all parts and labor for the full term. If your shingles fail in year 22 of a 25-year non-prorated plan, you get full value at today’s prices. Top-tier plans from all three manufacturers are non-prorated. That covers OC Platinum Protection, GAF Golden Pledge, and CertainTeed 5-Star. That’s the gold standard.
Transferability. Protecting your resale value.
A transferable warranty is real value when you sell your home. A buyer feels safer when the roof has 20+ years of non-prorated coverage left from a major manufacturer. That cuts one big worry during talks. For the step-by-step process, see how to transfer a roof warranty when selling a house in California.
Transfer rules vary by manufacturer:
Owens Corning: Platinum Protection is transferable. You must ask within 60 days of the home sale. A fee may apply. Coverage for the new owner may shift (often non-prorated for a shorter span).
GAF: Golden Pledge is transferable. The transfer must wrap up within 60 days. The new owner usually gets the rest of the coverage. Some changes apply to the workmanship term.
CertainTeed: 5-Star SureStart Plus is transferable. Rules include notice within a set window and a possible fee. The terms may shift for the new owner.
Standard and base-tier plans from all three manufacturers may not be transferable at all. Resale value matters (and in Central Valley markets, it should). Picking a transferable top-tier plan is a smart move.
GAF Silver Pledge warranty explained.
The GAF Silver Pledge warranty is GAF’s mid-tier plan. Only GAF Certified Plus or Master Elite contractors can sell it. It pairs 50 years of material defect coverage with a 10-year workmanship warranty. GAF backs it. Not just your contractor.
What GAF Silver Pledge covers:
- 50-year material defect coverage on lifetime shingles. Non-prorated for the first 10 years.
- 10-year workmanship coverage backed by GAF, not just the installer. If your Master Elite contractor closes, GAF still honors the install claim.
- Tear-off and disposal coverage when a covered failure needs a full replacement.
- Full GAF system needed. Underlayment, starter, ridge cap, and leak barrier must all be GAF-branded.
How to qualify for Silver Pledge: Your contractor must be GAF Certified Plus or Master Elite. The roof must use a full GAF-branded system. The contractor files the warranty with GAF for you at completion. As a GAF Master Elite contractor, Econo Roofing can register Silver Pledge for you.
Silver Pledge vs Golden Pledge: Golden Pledge is GAF’s top tier. It adds a stronger 25-year workmanship term plus a GAF site visit. Silver Pledge is a strong fit when you want manufacturer-backed workmanship at a lower system cost. See our Golden vs Silver comparison for the full side-by-side.
CertainTeed 5-Star warranty explained.
The CertainTeed 5-Star warranty (formal name: SureStart Plus 5-Star) is CertainTeed’s top warranty. Only SELECT ShingleMaster contractors can sell it. That’s CertainTeed’s top contractor tier.
What CertainTeed 5-Star covers:
- Lifetime / 50-year material defect coverage on Landmark, Presidential, and other lifetime shingles.
- 25-year SureStart workmanship coverage backed directly by CertainTeed.
- Non-prorated for the full coverage period — full replacement value, not depreciated payouts.
- Tear-off, disposal, and labor included in the replacement claim.
- Transferable once to the next homeowner with the remaining coverage intact (notice typically required within 60 days of sale).
How to qualify for CertainTeed 5-Star: The roof must be installed by a SELECT ShingleMaster contractor using a complete CertainTeed Integrity Roof System (shingles, underlayment, starter, hip and ridge, and ventilation all CertainTeed-approved). The SELECT ShingleMaster registers the warranty within 30 days of completion. For more, read The 5-Star Advantage.
What does “non-prorated” mean in roofing warranties?
In plain language: a non-prorated roofing warranty pays the full replacement value of your roof for the entire warranty term. A prorated warranty pays a shrinking percentage of replacement cost as the roof ages.
How prorated coverage actually plays out:
- Year 1–10: A typical prorated warranty pays 100% of replacement.
- Year 11: Coverage drops to roughly 80% — you eat 20% of the replacement bill.
- Year 15: Coverage often drops to 50%. On a $25,000 roof, you would pay $12,500 out of pocket.
- Year 25+: Many prorated warranties cover only 10–20% of replacement, or zero.
Why “non-prorated” matters: Roofs almost always fail later in life, not in year 2. A prorated warranty looks generous on paper but pays the least exactly when you need it most. A non-prorated warranty (like GAF Golden Pledge, CertainTeed 5-Star, or Owens Corning Platinum Protection) keeps paying full replacement value for the entire coverage period — including labor, tear-off, and disposal.
Quick rule of thumb: If a contractor advertises a long warranty but won’t put “non-prorated” in writing, the second half of that warranty is mostly marketing. Always ask for the prorate schedule in the warranty document before you sign.