Insulation. The layer your energy bill depends on.
Your roof keeps rain out. Insulation keeps cool air in. In the Central Valley, where summer attic heat reaches 150+ degrees, proper insulation is the difference between a $200 energy bill and a $400 one. Econo Roofing installs, upgrades, and replaces attic insulation during roof projects or as a standalone service.
The right insulation for your roof system.
Blown-In Fiberglass
Machine-blown loose fill that conforms around pipes, wires, and irregular joist spacing. R-2.5 per inch. Best for open attic floors. Fast install, non-combustible, does not settle as much as cellulose.
- Best for:
- Standard attic upgrades
Blown-In Cellulose
Recycled paper fiber treated with borate fire retardant. R-3.7 per inch. Denser than fiberglass, better at reducing air infiltration. Settles 15-20% over time, so we install to compensate.
- Best for:
- Older homes with air leaks
Spray Foam (Open & Closed Cell)
Expands on contact to seal every gap. Open-cell (R-3.6/inch) is cost-effective for interior walls. Closed-cell (R-6.5/inch) adds structural rigidity and water barrier. Best for cathedral ceilings and sealed attic assemblies.
- Best for:
- Cathedral ceilings, sealed attics
Radiant Barrier
Reflective aluminum sheet or spray-applied coating on the underside of roof decking. Blocks up to 97% of radiant heat transfer. In the Central Valley, a radiant barrier can drop attic heat by 20-30 degrees, reducing A/C workload significantly.
- Best for:
- Central Valley homes (high solar load)
Insulation works best when paired with roofing.
Access Without Damage
During a roof replacement, the deck is exposed. We can inspect, remove old insulation, seal air leaks at the source, and install new insulation with full visibility. No attic crawling through tight spaces.
Title 24 Compliance
California needs Title 24 cool roof compliance for re-roofing projects. When insulation is part of the scope, we ensure both the roof surface, the attic insulation meet current energy code. One inspection, one permit, one contractor.
Cost Savings
Combining insulation with roof work saves 15-25% compared to separate projects. You avoid duplicate mobilization, scaffolding, and permit fees. Ask about our financing options to spread the cost.
Frequently asked questions
How much insulation does my Central Valley home need?
California Title 24 needs R-30 minimum in attics for new construction, R-38 suggested for our climate. Most homes built before 2010 have R-19 or less — adding insulation is the cheapest energy upgrade available.
What's the difference between batt and blown-in insulation?
Batt: pre-cut fiberglass rolls, easier to install in attics with clear access, R-13 to R-38. Blown-in: cellulose or fiberglass loose-fill, fills tight spaces and around obstructions, R-19 to R-60 depending on depth. Blown-in is usually better for attic top-up.
What does insulation upgrade cost?
Adding R-19 cellulose to a typical 1,800 sq ft attic: $1,200–$2,200. Full R-38 install with air sealing: $2,500–$4,500. Most projects pay back through energy savings in 4–7 years.
Will more attic insulation help with summer heat?
Significantly. The Central Valley's attic heat reach 130–150°F in summer. Proper insulation reduces ceiling heat transfer by 60–80%, lowering AC load 15–30%. Combined with attic ventilation upgrades, the impact compounds.
What's a radiant barrier?
A reflective foil layer installed on the underside of roof rafters that reflects radiant heat back out. Reduces attic heat 20–30°F, working with insulation rather than replacing it. Most cost-effective in west-facing or sun-exposed homes.
Can attic insulation be added during a re-roof?
Yes — combining is good. We open the attic during decking inspection, blow in insulation while it's accessible, and close up before underlayment. Saves a separate insulation contractor visit.
Why this work matters to us.
Roofing is more than a transaction. The roof you install on a Central Valley home protects your family for decades. Wrong materials, wrong methods, or wrong crew, and you’re replacing it again in 12 years instead of 30. Right materials, right methods, and a properly trained crew, and your roof outlasts the mortgage. The difference is install detail, manufacturer-grade materials, and the certifications that hold contractors accountable.
Mario Espindola founded Econo Roofing in 1996. Three decades later, we’ve grown to a 20-person team serving the Central Valley. The operating principle hasn’t changed. Do the work right the first time. Document everything with photos. Stand behind the install with a written workmanship warranty. Register every manufacturer warranty within 30 days of completion. Treat every customer like they’re a neighbor — because in the Central Valley, most of them actually are.
Our credentials are earned, not bought. Econo Roofing is the only locally based, quad-certified contractor based in Stanislaus and Merced Counties. We’re also GAF Master Elite (about 2% of roofers, per GAF), CertainTeed Select ShingleMaster (top 1% of the roofing profession, per CertainTeed), and GAF Gold Elite. No other roofing contractor based in Stanislaus and Merced Counties holds all four credentials simultaneously. Each manufacturer audits our installs to maintain certification, which means we can’t cut corners on material grade, install method, or finish quality. The audits keep us honest on every project.
License #749551, verifiable at CSLB.ca.gov. We carry $1 million general liability insurance, full workers comp coverage, and a $25,000 CSLB contractor bond. Family-owned and operated. (209) 668-6222 reaches our team for free written estimates across the Central Valley cities we serve in Stanislaus and Merced counties.
Learn more.
- Attic Insulation & Roofing GuideComplete guide to insulation types, R-values, and costs in the Central Valley.
- Energy-Efficient Roofing for CaliforniaCool roof standards, reflective materials, and insulation integration.
- Title 24 Cool Roof RequirementsWhat the energy code means for your roofing project.
- Comprehensive Resource:Complete Guide to Roofing in Central Valley— everything you need to know about roofing in this climate.
Services that work with this one.
- Roof VentilationPairs with every roof — preserves manufacturer warranty.
- Roof ReplacementBest time to upgrade insulation is during re-roof.
- Roof CoatingReflective coating plus insulation maximizes energy savings.
- Flat RoofingFlat roofs benefit most from above-deck insulation.
- Roof MaintenanceRegular inspections catch insulation degradation early.
Talk to Mario’s team in 30 seconds.
Free estimate. Flat-rate written estimate. Zero obligation. We confirm every appointment within one business day.
Open 9am–5pm Mon–Fri, 9am–12pm Sat.
Or call (209) 668-6222 · License #749551 · OC Platinum Preferred · Get instant quote
